Live operations

12 vehicles tracked · 5 active delay alerts

Fleet position

Zone geofences and mill catchments · click a vehicle to inspect

Delay alerts
Every alert is attributed to a cause so mill queues are not confused with in-field shortfalls.
Mill-side

122

min lost · 2 vehicles

Cut & burn

141

min lost · 3 vehicles

Standing 68 min in the Felixton yard queue

Felixton weighbridge 2 has been offline since 10:40 and all traffic is funnelling through bridge 1. Queue depth is 11 vehicles against a normal 4. This is mill-side — no action available to the driver; expect a 40–70 min tail for the next three arrivals.

Raised 11:14

No cane on the loading zone at Ndwedwe Plateau

Burn was signed off at 05:10 but the cutting gang logged only 62 t against a 180 t target by 11:00. Likely a labour shortfall on the block. Recommend re-routing to 3210 Tongaat Hills where 240 t is staged.

Raised 11:02

Amatikulu yard hold — sampling backlog

Cane testing service is running a 3-sample backlog after a shift handover, adding roughly 20 min per vehicle. Yard flow is otherwise normal and clearing.

Raised 10:46

Slow haul-out on Mtunzini Ridge

Single loader working a steep section; in-field cycle has stretched from 18 to 31 min. Not a mill issue. A second haul-out tractor would recover roughly 1.5 loads on the shift.

Raised 10:31

Loading started 21 min late at Kwambonambi Block C

Loader refuelled at shift start. Within normal variance and already recovering — no intervention needed.

Raised 10:12